Help with BBS CF on Alfa Spider

Zitat von rickymx

Hello !thatsit!
sorry if i write in english but i'm from italy, i'm having a problem fitting the BBS CF rims in 8,5Jx19 ET 35 on my Spider with brembo. The problem is that the rim touch the caliper. I don't understand how is it possible as the standard alfa rims are 8J et 41 if i'm not wrong. Maybe someone here can help me as in deutschland you can fit bigger rims and seem to have more experience!
I saw also many brera with BBS CK, but when i asked to the italian seller of BBS they told me CF were the only that fit my car (they thought :D), do they come in the right 5x110? and also in dark grey? they need spacers?
Sorry if i wrote too much, but i'm worried for my baby 8(

thanks!

Hii!

I´m not sure if you can buy this BBS CF in 5x110... but there is a chance to fit 5x112 (audi/vw/Mercedes) on Spider with 5x110... You must buy some special Screws like this one:

http://shop.alfisti.net/Tuning-Styling…SW17::4716.html

With this screws you can fit the 5x112 Rims on a 5x110

Greetings from Germany

Till

Zitat von rickymx

Thank you, but maybe i did not explain well: i have these BBS CF in The right 5x110. The problem is that The inner of The spoke is too close to the caliper and The wheel can't rotate. So i was thinking of getting a 5mm spacers, has anyone tried to fit a 8.5Jx19 et30 (my wheels are et35 but with spacers is like if it is 30, right?) to my car?
I fear it could be too wide and touch The Fender.
If i can't fit These, would be nice to fit 5x112 wheels, but is it sure to use those bolts? No problem of vibration?

Thanks!!

No Proplem!

Yes thats right: a Wheel with ET35... and a Disdance-Spacer of 5 mm... is ET30! if u take a Spacer of 10mm... u have ET25 at the same Wheel...
I Use this Bolts at my 156 (5x98 --> 5x100) too... No Problems... No vibrations ore anything else... But u must Fit the Wheels exactly, it´s no problem.